Fiber Splices MCQ’s

Electronics & Communication Engineering Optical Communication

This set of Optical Communication Multiple Choice Questions & Answers (MCQs) focuses on “Fiber Splices”.

1. How many types of fiber splices are available?
a) One
b) Two
c) Three
d) Four

2. The insertion losses of the fiber splices are much less than the Fresnel reflection loss at a butted fiber joint.
a) True
b) False

3. Which of the following is not used as a flame heating source in fusion splicing?
a) Microprocessor torches
b) Ox hydric burners
c) Electric arc
d) Gas burner

4. A permanent joint formed between two different optical fibers in the field is known as a ____________
a) Fiber splice
b) Fiber connector
c) Fiber attenuator
d) Fiber dispersion

5. What is the main requirement with the fibers that are intended for splicing?
a) Smooth and oval end faces
b) Smooth and square end faces
c) Rough edge faces
d) Large core diameter

6. The heating of the two prepared fiber ends to their fusing point with the application of required axial pressure between the two optical fibers is called as ____________
a) Mechanical splicing
b) Fusion splicing
c) Melting
d) Diffusion

7. The rounding of the fiber ends with a low energy discharge before pressing the fibers together and fusing with a stronger arc is called as ____________
a) Pre-fusion
b) Diffusion
c) Crystallization
d) Alignment

8. _____________ are formed by sandwiching the butted fiber ends between a V-groove glass substrate and a flat glass retainer plate.
a) Springroove splices
b) V-groove splices
c) Elastic splices
d) Fusion splices

9. In score and break process, which of the following is not used as a cutting tool?
a) Diamond
b) Sapphire
c) Tungsten carbide
d) Copper

10. _____________ is caused by surface tension effects between the two fiber ends during fusing.
a) Pre-fusion
b) Diffusion
c) Self-alignment
d) Splicing

11. In case of multiple fusion, splice losses using an electric arc fusion device with multimode graded index fiber range from ____________
a) 0.01 to 0.04 dB
b) 0.19 to 0.25 dB
c) 0.12 to 0.15 dB
d) 0.04 to 0.12 dB

12. Mean splice insertion losses of 0.05 dB are obtained using multimode graded index fibers with the Springroove splice.
a) True
b) False

13. Alignment accuracy of the order ___________ is obtained using the three glass rod alignment sleeve.
a) 0.23 μm
b) 0.15 μm
c) 0.05 μm
d) 0.01 μm

14. Average insertion losses as low as _________ have been obtained with multimode graded index and single-mode fibers using ceramic capillaries.
a) 0.1 dB
b) 0.5 dB
c) 0.02 dB
d) 0.3 dB

Leave a Reply

Your email address will not be published. Required fields are marked *