Series Clipper-2 MCQ’s

This set of Analog Electronic Circuits Multiple Choice Questions & Answers (MCQs) focuses on “Series Clipper-2″.

1. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V is -1V. Cut-in voltage of diode is 0.7V. What will be the output of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a)

 b) 

c) 

d) 

2. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V is 1V. Cut-in voltage of diode is 0.7V. What will be the output of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a) 

b) 

c)

 d) 

3. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V is 1V. Cut-in voltage of diode is 0.7V. What will be the output of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a)

 b)

 c) 

d) 

4. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V is 1V. Cut-in voltage of diode is 0.7V. What will be the output of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a)

 b) 

c)

 d) 

5. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V1 is -1.5V and V2 is 1V. Cut-in voltage of diode is 0.7V. What will be the output of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a) 

b) 

c)

 d) 

6. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V1 is 1.5V and V2 is 1 V. Cut-in voltage of diode is 0.7V. What will be the output, Vout of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a) 

b) 

c) 

d) 

7. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V1 is 1V and V2 is 1.5V. Cut-in voltage of diode is 0.7V. What will be the output of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a) 

b)

 c) 

d) 

8. In the following clipper circuit resistance R1 and R2 is 1k. Voltage V1 is 1.5V and V2 is -1V. Cut-in voltage of diode is 0.7V. What will be the output, Vout of the system if Vin is the signal given below?
(Use constant voltage drop model for diode)

a) 

b) 

c) 

d)